What are the operating steps of the LED light bar lampshade?- Ningbo Fenghua Lamp Co.,Ltd.

1. Check whether the lampshade, light bar, and various parts and accessories used for finishing are complete;

2. According to the length of the counter, process the lampshade to cut off the matching length, and process 45° cut angles at both ends

3. Open through holes with a diameter of 3.5mm on the inside of the left and right ends of the counter lampshade, so as to connect with the fixed pad;

4. Open two M3 holes in the lower part of the left and right ends of the lamp trough, so as to connect with the triangular block;

Led Triproof Lights

5. Put the lampshade to be installed into a light bar of suitable size, and connect them together through the triangular block;

6. Glue the fixing block on the inner side of the glass corresponding to the opening of the left and right lampshades with shadowless glue;

7. Fix the connected lampshade on the counter with screws;

8. Install the wire rod;

9. Install the driver. Pay attention to the input and output ports when installing, and pay attention to the positive and negative connections when connecting the light bar. The red wire is the positive wire, and the black wire is the negative wire.