Search
English
Español①The width of the four-wire light is about 22mm, the thickness is about 8mm, and the weight is about 0.25kg/m (4 meters per kilogram)
②The four-wire light strip has four wires in total, three rows of lights (note that it is not four rows of lights~~), 24 lights per row of 1 meter, 24*3=72. Because the power of each lamp bead is 0.05W, the power of the 72-bead light strip is: 72*0.05=3.6W.
③ There is a "scissors" mark for each meter, and it can only be cut after the mark is cut. If you cut it wrong or cut it off, one meter will not be bright! Some may be missed because of marking. It is best to carefully look at the mark before cutting Position, just cut off the place where there is no connection in the middle. You can see it if you look closely.
④Each light strip must be equipped with a special plug (the plug has a transformer); when connecting, the transparent plastic cover must be removed, and then covered after the test light is connected. Do not connect directly with a cover, it is easy to short circuit.
⑤When the light strip is installed, it is generally placed in the light trough, and it can be straightened, or it can be fixed with a string or thin wire. If external or vertical installation is required, clips and tail plugs need to be purchased separately. The original clip is completely transparent. It is best to apply waterproof glass glue on the tail plug and plug after installation, so that the waterproof performance is better.
The use of special solder-free quick connectors provides the possibility for personal installation at home, without special tools such as soldering irons
